{"title":"Cocktail Underlays \u0026 CPO's","description":"\u003cp\u003eUpgrade your cocktail arcade cabinet with our premium underlays and CPO (Control Panel Overlays) designed for a perfect fit and lasting durability.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCocktail Cabinet Underlays\u003c\/strong\u003e — Crafted with a satin laminate finish, our underlays are precut for easy, hassle-free installation. Simply peel, place, and play.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl Panel Overlays (CPO's)\u003c\/strong\u003e — Built to handle the demands of heavy use and intense gameplay, our CPOs feature a textured polycarbonate laminate that resists wear, scratches, and everyday abuse.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhether you're restoring a classic cocktail cabinet or customizing a new build, StickerSmith has you covered with precision-cut graphics that look great and last.\u003c\/p\u003e","products":[{"product_id":"asteroids-deluxe-cocktail-arcade-control-panel-overlay-cpo-textured-laminate","title":"Asteroids Deluxe Cocktail Arcade Control Panel Overlay CPO Textured Laminate","description":"\u003cbr\u003e\u003cp\u003eIncluded\u003c\/p\u003e\u003cp\u003e2pc Cocktail CPO: fits original machine. All printed with Eco-solvent ink on premium 3 mil air release adhesive backed vinyl and laminated with TEXTURED POLYCARBONATE LAMINATE!\u003c\/p\u003e\u003cp\u003ePlease leave us a message for custom sizes or dimensions of kits.\u003c\/p\u003e\u003cp\u003ePlease check out our store for individual pieces of this kit.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eORDERING:\u003c\/p\u003e\u003cp\u003ePlease contact us if you would like alternate sizes and colors. We insure all dimensions are accurate as listed in our descriptions and photos. Make sure to measure your substrate for placement before ordering. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eNote: Settings on monitors, devices etc can vary from one to another and colors and sample pictures shown on our products are representative of the actual colors we use.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eMATERIALS NEEDED\u003c\/p\u003e\u003cp\u003eSmall cutting knife or razor blade (an Exacto Knife is ideal for the job)\u003c\/p\u003e\u003cp\u003eMasking tape\u003c\/p\u003e\u003cp\u003eLint free dry cloth\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSURFACE PREP\u003c\/p\u003e\u003cp\u003eWarning: Do not use any aromatic solvents such as acetone, M.E.K., toluene, paint thinner, lacquer thinner, gasoline or ammonia-based cleaners to clean the surface area.\u003c\/p\u003e\u003cp\u003eSaturate a clean cloth with isopropyl alcohol and wipe the surface where the vinyl is to be applied to remove any contaminates such as silicone, wax, or adhesives. Thoroughly dry the surface area with a lint free dry cloth.\u003c\/p\u003e\u003cp\u003eTemperatures of 50° to 90° F, with 70° to 80°F being the optimum range make sure surface area is not too hot or cold prior to applying.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAPPLICATION\u003c\/p\u003e\u003cp\u003eStep 1: Leaving the release liner on , position the vinyl on the substrate, taking care to measure and align it properly.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 2: When it's positioned correctly, apply a hinge using Main Blue painter's tape or something similar, to affix the graphic in place (from the center).\u003c\/p\u003e\u003cp\u003eYour hinge should secure the vinyl and liner to the substrate.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 3: With the masked vinyl print secured, lift one side of the vinyl away from the substrate and remove the release liner.\u003c\/p\u003e\u003cp\u003ePeel the masked vinyl and lay it back down on the other half of the graphic.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 4: Using scissors, a utility or exact o knife, cut away the exposed half of the release liner.\u003c\/p\u003e\u003cp\u003eTake a moment to make sure you still have a clean dry surface. Bits of dust or release liner fragments left behind can cause 'bubbles\"\" under your print.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 5: Raise the half with exposed adhesive and carefully lay it down on the surface, working with your squeegee to get a smooth, bubble and wrinkle-free application.\u003c\/p\u003e\u003cp\u003e Work from the center hinge outward.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 6: Then lift the other half, remove the remaining release liner and repeat the process.\u003c\/p\u003e\u003cp\u003eWhen both sides are secured, finish burnishing and then remove the application tape at 45 degree angle.\u003c\/p\u003e\u003cp\u003eAllow some time for the adhesive bond to form. And you are finished.\u003c\/p\u003e\u003cp\u003eImmediate payment is required.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSHIPPING\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWe only ship to confirmed addresses \u003c\/p\u003e\u003cp\u003ePlease make sure you provide the correct address we will not refund for incorrect address at the time of purchase \u003c\/p\u003e\u003cp\u003ePlease contact us for international shipping \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eRETURNS\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWe do not accept returns on international orders\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eOur customer support team is available through  messages only\u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":41784437211225,"sku":"EB-226165375522","price":35.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_df743d41-9b14-4c51-ae10-6dd758376ae9.jpg?v=1722342586"},{"product_id":"burgertime-cocktail-arcade-control-panel-overlay-cpo-set-of-2-textured-laminate","title":"Burgertime Cocktail Arcade Control Panel Overlay CPO Set Of 2 Textured Laminate","description":"\u003cbr\u003e\u003cp\u003eIncluded\u003c\/p\u003e\u003cp\u003e2pc Cocktail CPO: fits original machine. All printed with Eco-solvent ink on premium 3 mil air release adhesive backed vinyl and laminated with TEXTURED POLYCARBONATE LAMINATE!\u003c\/p\u003e\u003cp\u003ePlease leave us a message for custom sizes or dimensions of kits.\u003c\/p\u003e\u003cp\u003ePlease check out our store for individual pieces of this kit.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eORDERING:\u003c\/p\u003e\u003cp\u003ePlease contact us if you would like alternate sizes and colors. We insure all dimensions are accurate as listed in our descriptions and photos. Make sure to measure your substrate for placement before ordering. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eNote: Settings on monitors, devices etc can vary from one to another and colors and sample pictures shown on our products are representative of the actual colors we use.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eMATERIALS NEEDED\u003c\/p\u003e\u003cp\u003eSmall cutting knife or razor blade (an Exacto Knife is ideal for the job)\u003c\/p\u003e\u003cp\u003eMasking tape\u003c\/p\u003e\u003cp\u003eLint free dry cloth\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSURFACE PREP\u003c\/p\u003e\u003cp\u003eWarning: Do not use any aromatic solvents such as acetone, M.E.K., toluene, paint thinner, lacquer thinner, gasoline or ammonia-based cleaners to clean the surface area.\u003c\/p\u003e\u003cp\u003eSaturate a clean cloth with isopropyl alcohol and wipe the surface where the vinyl is to be applied to remove any contaminates such as silicone, wax, or adhesives. Thoroughly dry the surface area with a lint free dry cloth.\u003c\/p\u003e\u003cp\u003eTemperatures of 50° to 90° F, with 70° to 80°F being the optimum range make sure surface area is not too hot or cold prior to applying.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAPPLICATION\u003c\/p\u003e\u003cp\u003eStep 1: Leaving the release liner on , position the vinyl on the substrate, taking care to measure and align it properly.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 2: When it's positioned correctly, apply a hinge using Main Blue painter's tape or something similar, to affix the graphic in place (from the center).\u003c\/p\u003e\u003cp\u003eYour hinge should secure the vinyl and liner to the substrate.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 3: With the masked vinyl print secured, lift one side of the vinyl away from the substrate and remove the release liner.\u003c\/p\u003e\u003cp\u003ePeel the masked vinyl and lay it back down on the other half of the graphic.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 4: Using scissors, a utility or exact o knife, cut away the exposed half of the release liner.\u003c\/p\u003e\u003cp\u003eTake a moment to make sure you still have a clean dry surface. Bits of dust or release liner fragments left behind can cause 'bubbles\"\" under your print.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 5: Raise the half with exposed adhesive and carefully lay it down on the surface, working with your squeegee to get a smooth, bubble and wrinkle-free application.\u003c\/p\u003e\u003cp\u003e Work from the center hinge outward.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 6: Then lift the other half, remove the remaining release liner and repeat the process.\u003c\/p\u003e\u003cp\u003eWhen both sides are secured, finish burnishing and then remove the application tape at 45 degree angle.\u003c\/p\u003e\u003cp\u003eAllow some time for the adhesive bond to form. And you are finished.\u003c\/p\u003e\u003cp\u003eImmediate payment is required.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSHIPPING\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWe only ship to confirmed addresses \u003c\/p\u003e\u003cp\u003ePlease make sure you provide the correct address we will not refund for incorrect address at the time of purchase \u003c\/p\u003e\u003cp\u003ePlease contact us for international shipping \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eRETURNS\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWe do not accept returns on international orders\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eOur customer support team is available through  messages only\u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":41784831967321,"sku":"CTCPO-BURGERTIME","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_4612cb4d-1f67-40ad-b077-cbd4d8aa23df.jpg?v=1722347073"},{"product_id":"ms-pac-man-cocktail-arcade-control-panel-overlay-cpo-textured-laminate","title":"Ms Pac Man Cocktail Arcade Control Panel Overlay CPO Textured Laminate","description":"\u003cbr\u003e\u003cp\u003eIncluded\u003c\/p\u003e\u003cp\u003eCPO: 2pc fits original arcade cocktail. All printed with Eco-solvent ink on premium 3 mil air release adhesive backed vinyl and laminated with TEXTURED POLYCARBONATE LAMINATE!\u003c\/p\u003e\u003cp\u003ePlease leave us a message for custom sizes or dimensions of kits.\u003c\/p\u003e\u003cp\u003ePlease check out our store for individual pieces of this kit.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eORDERING:\u003c\/p\u003e\u003cp\u003ePlease contact us if you would like alternate sizes and colors. We insure all dimensions are accurate as listed in our descriptions and photos. Make sure to measure your substrate for placement before ordering. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eNote: Settings on monitors, devices etc can vary from one to another and colors and sample pictures shown on our products are representative of the actual colors we use.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eMATERIALS NEEDED\u003c\/p\u003e\u003cp\u003eSmall cutting knife or razor blade (an Exacto Knife is ideal for the job)\u003c\/p\u003e\u003cp\u003eMasking tape\u003c\/p\u003e\u003cp\u003eLint free dry cloth\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSURFACE PREP\u003c\/p\u003e\u003cp\u003eWarning: Do not use any aromatic solvents such as acetone, M.E.K., toluene, paint thinner, lacquer thinner, gasoline or ammonia-based cleaners to clean the surface area.\u003c\/p\u003e\u003cp\u003eSaturate a clean cloth with isopropyl alcohol and wipe the surface where the vinyl is to be applied to remove any contaminates such as silicone, wax, or adhesives. Thoroughly dry the surface area with a lint free dry cloth.\u003c\/p\u003e\u003cp\u003eTemperatures of 50° to 90° F, with 70° to 80°F being the optimum range make sure surface area is not too hot or cold prior to applying.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAPPLICATION\u003c\/p\u003e\u003cp\u003eStep 1: Leaving the release liner on , position the vinyl on the substrate, taking care to measure and align it properly.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 2: When it's positioned correctly, apply a hinge using Main Blue painter's tape or something similar, to affix the graphic in place (from the center).\u003c\/p\u003e\u003cp\u003eYour hinge should secure the vinyl and liner to the substrate.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 3: With the masked vinyl print secured, lift one side of the vinyl away from the substrate and remove the release liner.\u003c\/p\u003e\u003cp\u003ePeel the masked vinyl and lay it back down on the other half of the graphic.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 4: Using scissors, a utility or exact o knife, cut away the exposed half of the release liner.\u003c\/p\u003e\u003cp\u003eTake a moment to make sure you still have a clean dry surface. Bits of dust or release liner fragments left behind can cause 'bubbles\"\" under your print.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 5: Raise the half with exposed adhesive and carefully lay it down on the surface, working with your squeegee to get a smooth, bubble and wrinkle-free application.\u003c\/p\u003e\u003cp\u003e Work from the center hinge outward.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 6: Then lift the other half, remove the remaining release liner and repeat the process.\u003c\/p\u003e\u003cp\u003eWhen both sides are secured, finish burnishing and then remove the application tape at 45 degree angle.\u003c\/p\u003e\u003cp\u003eAllow some time for the adhesive bond to form. And you are finished.\u003c\/p\u003e\u003cp\u003eImmediate payment is required.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eSHIPPING\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWe only ship to confirmed addresses \u003c\/p\u003e\u003cp\u003ePlease make sure you provide the correct address we will not refund for incorrect address at the time of purchase \u003c\/p\u003e\u003cp\u003ePlease contact us for international shipping \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eRETURNS\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWe do not accept returns on international orders\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eOur customer support team is available through  messages only\u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":41785680396377,"sku":"EB-395412072844","price":24.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_f8d8e189-a091-46c3-bdac-9c8fe8ac1c9f.jpg?v=1722366735"},{"product_id":"ms-pac-man-arcade-cocktail-underlay-artwork-sticker-decal","title":"Ms Pac Man Arcade Cocktail Underlay Decal","description":"\u003cbr\u003e\u003cp\u003eFEATURES\u003c\/p\u003e\u003cp\u003ePrinted on premium 3 mil Adhesive backed vinyl with Air-release bubble free application.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAPPLIED DIRECTLY TO TABLE UNDER GLASS \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eFinish: Gloss\u003c\/p\u003e\u003cp\u003econtour cut center and outside path.\u003c\/p\u003e\u003cp\u003ePrinted with solvent ink and Laminated to insure your Underlay Will not fade and look good for years\u003c\/p\u003e\u003cp\u003eORDERING:\u003c\/p\u003e\u003cp\u003ePlease contact us if you would like alternate sizes and colors. We insure all dimensions are accurate as listed in our descriptions and photos. Make sure to measure your substrate for placement before ordering. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eNote: Settings on monitors, devices etc can vary from one to another and colors and sample pictures shown on our products are representative of the actual colors we use.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eMATERIALS NEEDED\u003c\/p\u003e\u003cp\u003eSmall cutting knife or razor blade (an Exacto Knife is ideal for the job)\u003c\/p\u003e\u003cp\u003eMasking tape\u003c\/p\u003e\u003cp\u003eLint free dry cloth\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSURFACE PREP\u003c\/p\u003e\u003cp\u003eWarning: Do not use any aromatic solvents such as acetone, M.E.K., toluene, paint thinner, lacquer thinner, gasoline or ammonia-based cleaners to clean the surface area.\u003c\/p\u003e\u003cp\u003eSaturate a clean cloth with isopropyl alcohol and wipe the surface where the vinyl is to be applied to remove any contaminates such as silicone, wax, or adhesives. Thoroughly dry the surface area with a lint free dry cloth.\u003c\/p\u003e\u003cp\u003eTemperatures of 50° to 90° F, with 70° to 80°F being the optimum range make sure surface area is not too hot or cold prior to applying.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAPPLICATION\u003c\/p\u003e\u003cp\u003eStep 1: Leaving the release liner on , position the vinyl on the substrate, taking care to measure and align it properly.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 2: When it's positioned correctly, apply a hinge using Main Blue painter's tape or something similar, to affix the graphic in place (from the center).\u003c\/p\u003e\u003cp\u003eYour hinge should secure the vinyl and liner to the substrate.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 3: With the masked vinyl print secured, lift one side of the vinyl away from the substrate and remove the release liner.\u003c\/p\u003e\u003cp\u003ePeel the masked vinyl and lay it back down on the other half of the graphic.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 4: Using scissors, a utility or exact o knife, cut away the exposed half of the release liner.\u003c\/p\u003e\u003cp\u003eTake a moment to make sure you still have a clean dry surface. Bits of dust or release liner fragments left behind can cause 'bubbles\"\" under your print.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 5: Raise the half with exposed adhesive and carefully lay it down on the surface, working with your squeegee to get a smooth, bubble and wrinkle-free application.\u003c\/p\u003e\u003cp\u003e Work from the center hinge outward.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 6: Then lift the other half, remove the remaining release liner and repeat the process.\u003c\/p\u003e\u003cp\u003eWhen both sides are secured, finish burnishing and then remove the application tape at 45 degree angle.\u003c\/p\u003e\u003cp\u003eAllow some time for the adhesive bond to form. And you are finished.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003ePAYMENT\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWe accept payment by PayPal.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSHIPPING\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWe only ship to confirmed addresses \u003c\/p\u003e\u003cp\u003ePlease make sure you provide the correct address we will not refund for incorrect address at the time of purchase \u003c\/p\u003e\u003cp\u003ePlease contact us for international shipping \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eRETURNS\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWe do not accept returns on international orders\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eOur customer support team is available through  messages only Monday through Friday \u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":42504038350937,"sku":"CTU-MSPAC","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_95b948c5-2645-4d85-924f-fd4a9bd04520.jpg?v=1752540902"},{"product_id":"burgertime-arcade-cocktail-underlay-artwork-sticker-decal","title":"Burgertime Arcade Cocktail Underlay Decal","description":"\u003cbr\u003e\u003cp\u003eFEATURES\u003c\/p\u003e\u003cp\u003ePrinted on premium 3 mil Adhesive backed vinyl with Air-release bubble free application.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAPPLIED DIRECTLY TO TABLE UNDER GLASS \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eFinish: Gloss\u003c\/p\u003e\u003cp\u003econtour cut center and outside path.\u003c\/p\u003e\u003cp\u003ePrinted with solvent ink and Laminated to insure your Underlay Will not fade and look good for years\u003c\/p\u003e\u003cp\u003eORDERING:\u003c\/p\u003e\u003cp\u003ePlease contact us if you would like alternate sizes and colors. We insure all dimensions are accurate as listed in our descriptions and photos. Make sure to measure your substrate for placement before ordering. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eNote: Settings on monitors, devices etc can vary from one to another and colors and sample pictures shown on our products are representative of the actual colors we use.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eMATERIALS NEEDED\u003c\/p\u003e\u003cp\u003eSmall cutting knife or razor blade (an Exacto Knife is ideal for the job)\u003c\/p\u003e\u003cp\u003eMasking tape\u003c\/p\u003e\u003cp\u003eLint free dry cloth\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSURFACE PREP\u003c\/p\u003e\u003cp\u003eWarning: Do not use any aromatic solvents such as acetone, M.E.K., toluene, paint thinner, lacquer thinner, gasoline or ammonia-based cleaners to clean the surface area.\u003c\/p\u003e\u003cp\u003eSaturate a clean cloth with isopropyl alcohol and wipe the surface where the vinyl is to be applied to remove any contaminates such as silicone, wax, or adhesives. Thoroughly dry the surface area with a lint free dry cloth.\u003c\/p\u003e\u003cp\u003eTemperatures of 50° to 90° F, with 70° to 80°F being the optimum range make sure surface area is not too hot or cold prior to applying.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAPPLICATION\u003c\/p\u003e\u003cp\u003eStep 1: Leaving the release liner on , position the vinyl on the substrate, taking care to measure and align it properly.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 2: When it's positioned correctly, apply a hinge using Main Blue painter's tape or something similar, to affix the graphic in place (from the center).\u003c\/p\u003e\u003cp\u003eYour hinge should secure the vinyl and liner to the substrate.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 3: With the masked vinyl print secured, lift one side of the vinyl away from the substrate and remove the release liner.\u003c\/p\u003e\u003cp\u003ePeel the masked vinyl and lay it back down on the other half of the graphic.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 4: Using scissors, a utility or exact o knife, cut away the exposed half of the release liner.\u003c\/p\u003e\u003cp\u003eTake a moment to make sure you still have a clean dry surface. Bits of dust or release liner fragments left behind can cause 'bubbles\"\" under your print.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 5: Raise the half with exposed adhesive and carefully lay it down on the surface, working with your squeegee to get a smooth, bubble and wrinkle-free application.\u003c\/p\u003e\u003cp\u003e Work from the center hinge outward.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 6: Then lift the other half, remove the remaining release liner and repeat the process.\u003c\/p\u003e\u003cp\u003eWhen both sides are secured, finish burnishing and then remove the application tape at 45 degree angle.\u003c\/p\u003e\u003cp\u003eAllow some time for the adhesive bond to form. And you are finished.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003ePAYMENT\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWe accept payment by PayPal.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSHIPPING\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWe only ship to confirmed addresses \u003c\/p\u003e\u003cp\u003ePlease make sure you provide the correct address we will not refund for incorrect address at the time of purchase \u003c\/p\u003e\u003cp\u003ePlease contact us for international shipping \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eRETURNS\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWe do not accept returns on international orders\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eOur customer support team is available through  messages only Monday through Friday \u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":42504038416473,"sku":"CTU-BURGERTIME","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_32d6d62c-672d-4372-96da-32e70ef6f30e.jpg?v=1752540905"},{"product_id":"jr-pac-man-arcade-cocktail-underlay-artwork-sticker-decal","title":"Jr Pac Man Arcade Cocktail Underlay Decal","description":"\u003cbr\u003e\u003cp\u003eFEATURES\u003c\/p\u003e\u003cp\u003ePrinted on premium 3 mil Adhesive backed vinyl with Air-release bubble free application.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAPPLIED DIRECTLY TO TABLE UNDER GLASS \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eFinish: Gloss\u003c\/p\u003e\u003cp\u003econtour cut center and outside path.\u003c\/p\u003e\u003cp\u003ePrinted with solvent ink and Laminated to insure your Underlay Will not fade and look good for years\u003c\/p\u003e\u003cp\u003eORDERING:\u003c\/p\u003e\u003cp\u003ePlease contact us if you would like alternate sizes and colors. We insure all dimensions are accurate as listed in our descriptions and photos. Make sure to measure your substrate for placement before ordering. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eNote: Settings on monitors, devices etc can vary from one to another and colors and sample pictures shown on our products are representative of the actual colors we use.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eMATERIALS NEEDED\u003c\/p\u003e\u003cp\u003eSmall cutting knife or razor blade (an Exacto Knife is ideal for the job)\u003c\/p\u003e\u003cp\u003eMasking tape\u003c\/p\u003e\u003cp\u003eLint free dry cloth\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSURFACE PREP\u003c\/p\u003e\u003cp\u003eWarning: Do not use any aromatic solvents such as acetone, M.E.K., toluene, paint thinner, lacquer thinner, gasoline or ammonia-based cleaners to clean the surface area.\u003c\/p\u003e\u003cp\u003eSaturate a clean cloth with isopropyl alcohol and wipe the surface where the vinyl is to be applied to remove any contaminates such as silicone, wax, or adhesives. Thoroughly dry the surface area with a lint free dry cloth.\u003c\/p\u003e\u003cp\u003eTemperatures of 50° to 90° F, with 70° to 80°F being the optimum range make sure surface area is not too hot or cold prior to applying.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAPPLICATION\u003c\/p\u003e\u003cp\u003eStep 1: Leaving the release liner on , position the vinyl on the substrate, taking care to measure and align it properly.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 2: When it's positioned correctly, apply a hinge using Main Blue painter's tape or something similar, to affix the graphic in place (from the center).\u003c\/p\u003e\u003cp\u003eYour hinge should secure the vinyl and liner to the substrate.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 3: With the masked vinyl print secured, lift one side of the vinyl away from the substrate and remove the release liner.\u003c\/p\u003e\u003cp\u003ePeel the masked vinyl and lay it back down on the other half of the graphic.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 4: Using scissors, a utility or exact o knife, cut away the exposed half of the release liner.\u003c\/p\u003e\u003cp\u003eTake a moment to make sure you still have a clean dry surface. Bits of dust or release liner fragments left behind can cause 'bubbles\"\" under your print.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 5: Raise the half with exposed adhesive and carefully lay it down on the surface, working with your squeegee to get a smooth, bubble and wrinkle-free application.\u003c\/p\u003e\u003cp\u003e Work from the center hinge outward.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 6: Then lift the other half, remove the remaining release liner and repeat the process.\u003c\/p\u003e\u003cp\u003eWhen both sides are secured, finish burnishing and then remove the application tape at 45 degree angle.\u003c\/p\u003e\u003cp\u003eAllow some time for the adhesive bond to form. And you are finished.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003ePAYMENT\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWe accept payment by PayPal.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSHIPPING\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWe only ship to confirmed addresses \u003c\/p\u003e\u003cp\u003ePlease make sure you provide the correct address we will not refund for incorrect address at the time of purchase \u003c\/p\u003e\u003cp\u003ePlease contact us for international shipping \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eRETURNS\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWe do not accept returns on international orders\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eOur customer support team is available through  messages only Monday through Friday \u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":42504038514777,"sku":"CTU-JRPAC","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_aeb18dc0-9725-4e6c-bdc0-55cacf431363.jpg?v=1752540907"},{"product_id":"galaga-arcade-cocktail-underlay-artwork-sticker-decal","title":"Galaga Arcade Cocktail Underlay Decal","description":"\u003cbr\u003e\u003cp\u003eFEATURES\u003c\/p\u003e\u003cp\u003ePrinted on premium 3 mil Adhesive backed vinyl with Air-release bubble free application.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAPPLIED DIRECTLY TO TABLE UNDER GLASS \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eFinish: Gloss\u003c\/p\u003e\u003cp\u003econtour cut center and outside path.\u003c\/p\u003e\u003cp\u003ePrinted with solvent ink and Laminated to insure your Underlay Will not fade and look good for years\u003c\/p\u003e\u003cp\u003eORDERING:\u003c\/p\u003e\u003cp\u003ePlease contact us if you would like alternate sizes and colors. We insure all dimensions are accurate as listed in our descriptions and photos. Make sure to measure your substrate for placement before ordering. \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eNote: Settings on monitors, devices etc can vary from one to another and colors and sample pictures shown on our products are representative of the actual colors we use.\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003e\u003cp\u003eMATERIALS NEEDED\u003c\/p\u003e\u003cp\u003eSmall cutting knife or razor blade (an Exacto Knife is ideal for the job)\u003c\/p\u003e\u003cp\u003eMasking tape\u003c\/p\u003e\u003cp\u003eLint free dry cloth\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSURFACE PREP\u003c\/p\u003e\u003cp\u003eWarning: Do not use any aromatic solvents such as acetone, M.E.K., toluene, paint thinner, lacquer thinner, gasoline or ammonia-based cleaners to clean the surface area.\u003c\/p\u003e\u003cp\u003eSaturate a clean cloth with isopropyl alcohol and wipe the surface where the vinyl is to be applied to remove any contaminates such as silicone, wax, or adhesives. Thoroughly dry the surface area with a lint free dry cloth.\u003c\/p\u003e\u003cp\u003eTemperatures of 50° to 90° F, with 70° to 80°F being the optimum range make sure surface area is not too hot or cold prior to applying.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eAPPLICATION\u003c\/p\u003e\u003cp\u003eStep 1: Leaving the release liner on , position the vinyl on the substrate, taking care to measure and align it properly.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 2: When it's positioned correctly, apply a hinge using Main Blue painter's tape or something similar, to affix the graphic in place (from the center).\u003c\/p\u003e\u003cp\u003eYour hinge should secure the vinyl and liner to the substrate.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 3: With the masked vinyl print secured, lift one side of the vinyl away from the substrate and remove the release liner.\u003c\/p\u003e\u003cp\u003ePeel the masked vinyl and lay it back down on the other half of the graphic.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003eStep 4: Using scissors, a utility or exact o knife, cut away the exposed half of the release liner.\u003c\/p\u003e\u003cp\u003eTake a moment to make sure you still have a clean dry surface. Bits of dust or release liner fragments left behind can cause 'bubbles\"\" under your print.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 5: Raise the half with exposed adhesive and carefully lay it down on the surface, working with your squeegee to get a smooth, bubble and wrinkle-free application.\u003c\/p\u003e\u003cp\u003e Work from the center hinge outward.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eStep 6: Then lift the other half, remove the remaining release liner and repeat the process.\u003c\/p\u003e\u003cp\u003eWhen both sides are secured, finish burnishing and then remove the application tape at 45 degree angle.\u003c\/p\u003e\u003cp\u003eAllow some time for the adhesive bond to form. And you are finished.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003ePAYMENT\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWe accept payment by PayPal.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eSHIPPING\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWe only ship to confirmed addresses \u003c\/p\u003e\u003cp\u003ePlease make sure you provide the correct address we will not refund for incorrect address at the time of purchase \u003c\/p\u003e\u003cp\u003ePlease contact us for international shipping \u003c\/p\u003e\u003cbr\u003e\u003cp\u003eRETURNS\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003c\/p\u003e\u003cp\u003eWe do not accept returns on international orders\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eOur customer support team is available through  messages only Monday through Friday \u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":42504038580313,"sku":"CTU-GALAGA","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_75727592-b331-4797-a6c4-8ee36c8fb006.jpg?v=1752540910"},{"product_id":"scramble-arcade-cocktail-underlay-artwork-sticker-decal","title":"Scramble Arcade Cocktail Underlay Decal","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eScramble Cocktail Underlay\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003ePrinted on premium 3 mil Adhesive backed vinyl with Air-release bubble free application.\u003c\/p\u003e\n\u003cp\u003eAPPLIED DIRECTLY TO TABLE UNDER GLASS\u003c\/p\u003e\n\u003cp\u003eFinish: Satin\u003c\/p\u003e\n\u003cp\u003econtour cut center and outside path.\u003c\/p\u003e\n\u003cp\u003ePrinted with solvent ink and Laminated to insure your Underlay Will not fade and look good for years\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":42504040513625,"sku":"CTU-SCRAMBLE","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_1a233568-7b54-4332-a8a3-104d818febcc.jpg?v=1752541015"},{"product_id":"pooyan-arcade-cocktail-underlay-artwork-sticker-decal","title":"Pooyan Arcade Cocktail Underlay Decal","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePooyan Cocktail Underlay\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003ePrinted on premium 3 mil Adhesive backed vinyl with Air-release bubble free application.\u003c\/p\u003e\n\u003cp\u003eAPPLIED DIRECTLY TO TABLE UNDER GLASS\u003c\/p\u003e\n\u003cp\u003eFinish: Satin\u003c\/p\u003e\n\u003cp\u003econtour cut center and outside path.\u003c\/p\u003e\n\u003cp\u003ePrinted with solvent ink and Laminated to insure your Underlay Will not fade and look good for years\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":42504040611929,"sku":"CTU-POOYAN","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_ed6b938c-d477-405a-8fee-c3687bb0184d.jpg?v=1752541017"},{"product_id":"phoenix-arcade-cocktail-underlay-artwork-sticker-decal","title":"Phoenix Arcade Cocktail Underlay Decal","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePhoenix Cocktail Underlay\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003ePrinted on premium 3 mil Adhesive backed vinyl with Air-release bubble free application.\u003c\/p\u003e\n\u003cp\u003eAPPLIED DIRECTLY TO TABLE UNDER GLASS\u003c\/p\u003e\n\u003cp\u003eFinish: Satin\u003c\/p\u003e\n\u003cp\u003econtour cut center and outside path.\u003c\/p\u003e\n\u003cp\u003ePrinted with solvent ink and Laminated to insure your Underlay Will not fade and look good for years\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":42504040841305,"sku":"CTU-PHOENIX","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_52309460-834c-41e3-94ed-dc11980a1a22.jpg?v=1752541020"},{"product_id":"space-invader-2-arcade-cocktail-underlay-artwork-sticker-decal","title":"Space Invader 2 Arcade Cocktail Underlay Decal","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eSpace Invader 2 Cocktail Underlay\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003ePrinted on premium 3 mil Adhesive backed vinyl with Air-release bubble free application.\u003c\/p\u003e\n\u003cp\u003eAPPLIED DIRECTLY TO TABLE UNDER GLASS\u003c\/p\u003e\n\u003cp\u003eFinish: Satin\u003c\/p\u003e\n\u003cp\u003econtour cut center and outside path.\u003c\/p\u003e\n\u003cp\u003ePrinted with solvent ink and Laminated to insure your Underlay Will not fade and look good for years\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":42504040939609,"sku":"CTU-SPACEINV2","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_65a8d483-7439-41e3-8ada-7702da2c401f.jpg?v=1752541023"},{"product_id":"pleiades-arcade-cocktail-underlay-artwork-sticker-decal","title":"Pleiades Arcade Cocktail Underlay Artwork","description":"\u003cp\u003ePleiades Cocktail Cabinet Underlay Decal\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003ePrinted on premium 3 mil Adhesive backed vinyl with Air-release bubble free application.\u003c\/p\u003e\n\u003cp\u003eAPPLIED DIRECTLY TO TABLE UNDER GLASS\u003c\/p\u003e\n\u003cp\u003eFinish: Satin\u003c\/p\u003e\n\u003cp\u003econtour cut center and outside path.\u003c\/p\u003e\n\u003cp\u003ePrinted with solvent ink and Laminated to insure your Underlay Will not fade and look good for years\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":42504041005145,"sku":"CTU-PLEIADES","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_e4c36693-8686-4938-883b-e4a2789f1ac2.jpg?v=1752541025"},{"product_id":"wizard-of-wor-arcade-cocktail-underlay-artwork-sticker-decal","title":"Wizard Of Wor Arcade Cocktail Underlay Decal","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003ePrinted on premium 3 mil Adhesive backed vinyl with Air-release bubble free application.\u003c\/p\u003e\n\u003cp\u003eAPPLIED DIRECTLY TO TABLE UNDER GLASS\u003c\/p\u003e\n\u003cp\u003eFinish: Satin\u003c\/p\u003e\n\u003cp\u003econtour cut center and outside path.\u003c\/p\u003e\n\u003cp\u003ePrinted with solvent ink and Laminated to insure your Underlay Will not fade and look good for years\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":42504066105433,"sku":"CTU-WOW","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_f9ca935d-ba5c-4ff6-890d-b2dce2e4c2ae.jpg?v=1752543706"},{"product_id":"tron-arcade-cocktail-underlay-artwork-sticker-decal","title":"Tron Arcade Cocktail Underlay Decal","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eFEATURES\u003c\/p\u003e\n\u003cp\u003ePrinted on premium 3 mil Adhesive backed vinyl with Air-release bubble free application.\u003c\/p\u003e\n\u003cp\u003eAPPLIED DIRECTLY TO TABLE UNDER GLASS\u003c\/p\u003e\n\u003cp\u003eFinish: Satin\u003c\/p\u003e\n\u003cp\u003econtour cut center and outside path.\u003c\/p\u003e\n\u003cp\u003ePrinted with solvent ink and Laminated to insure your Underlay Will not fade and look good for years\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"StickerSmith","offers":[{"title":"Default Title","offer_id":42504066170969,"sku":"CTU-TRON","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_cf964237-93dd-41be-ae12-f11573a42e3c.jpg?v=1752543708"},{"product_id":"galaga-cocktail-arcade-control-panel-overlay-cpo-set-of-2-textured-laminate","title":"Galaga Cocktail Arcade Control Panel Overlay Set Of 2","description":"\u003cp\u003eThese are made with Textured Polycarbonate Laminate...made for heavy traffic and will outlast the competitors product.  Just like the originals!!!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIncluded\u003c\/p\u003e\n\u003cp\u003e2pc Cocktail CPO: fits original machine. All printed with Eco-solvent ink on premium 3 mil air release adhesive backed vinyl and laminated with TEXTURED POLYCARBONATE LAMINATE!\u003c\/p\u003e\n\u003cp\u003ePlease leave us a message for custom sizes or dimensions of kits.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Stickersmith","offers":[{"title":"Default Title","offer_id":43262977441881,"sku":"CTCPO-GALAGA","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_6cb37455-e593-4488-88c3-c53d514d4f58.jpg?v=1777302884"},{"product_id":"gorf-cocktail-arcade-control-panel-overlay-cpo-set-of-2-textured-laminate","title":"Gorf Cocktail Arcade Control Panel Overlay 2 pieces","description":"\u003cp\u003eGorf Cocktail Control Panels set of 2\u003c\/p\u003e\n\u003cp\u003eThese are made with Textured Polycarbonate Laminate...made for heavy traffic and will outlast the competitors product.  Just like the originals!!!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIncluded\u003c\/p\u003e\n\u003cp\u003e2pc Cocktail CPO: fits original machine. All printed with Eco-solvent ink on premium 3 mil air release adhesive backed vinyl and laminated with TEXTURED POLYCARBONATE LAMINATE!\u003c\/p\u003e\n\u003cp\u003eWe also make custom sizes\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Stickersmith","offers":[{"title":"Default Title","offer_id":43265514733657,"sku":"CTCPO-GORF","price":45.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/files\/57_4444d002-329c-4eb5-8202-aac0854e3e94.png?v=1777352475"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0561\/3286\/2041\/collections\/cocktail-cabinet.png?v=1774547800","url":"https:\/\/stickersmitharcade.com\/collections\/cocktail-underlays-cpos.oembed","provider":"StickerSmith Arcade","version":"1.0","type":"link"}